Why wait for Byrd to make one? We have them in stock and can ship within the hour!!!
Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go.
Call Dave at 410-465-6209
for more details or to add inserts to your order!
Hot
In Stock
Brand: Byrd Tooling
Model: KN400 S
Single Genuine KN400 insert will fit all Byrd Shelix heads.
FREE expedited 1st Class Mail USA SHIPPING
Size = 15mm x 15 mm x 2.5 mm
edges : radius 100mm
..
$3.59
Hot
Brand: Byrd Tooling
Model: KN400 INDEXED
This box of 10 inserts fit all Byrd Shelix heads.
Size = 15mm x 15 mm x 2.5 mm
Radius 4"
Indexed on all 4 corners
Solid Carbide
edges : sharp points with edges with a 100mm radius (place edge on table and you should see a little light on each end, they should rock slightly)
Plastic Case I..
$35.00
Hot
Brand: Byrd Tooling
Model: KN400
This box of 10 inserts fit all Byrd Shelix heads.
Size = 15mm x 15 mm x 2.5 mm
Solid Carbide
edges : sharp points with edges with a 100mm radius (place edge on table and you should see a little light on each end, they should rock slightly)
Plastic Case Includes 10 knives
Genuine Byrd Inser..
$31.99
Hot
In Stock
Brand: Byrd Tooling
Model: 1791212
This box of 10 inserts fits the Powermatic 1791212 shelix head.Why Pay $99.99 for the same box from Powermatic. Size = 15mm x 15 mm x 2.5 mm edges : radius 100mm Plastic Case Includes 10 knives Oem Made in Germany ..
$32.99
In Stock
Brand: Byrd Tooling
Model: 48301202-3
Major Diameter 3" (major means the outer most cutting diameter, tip to tip, its also the bearing OD)
Cutting Edge Length 3" (with bearing, you need about 3-5/8" clearance under nut)
Includes factory installed 15mm x 15mm x 2.5mm carbide inserts torques to 45 inch/lbs
Factory matched to head diame..
$249.99
Typically in Stock
Brand: Byrd Tooling
Model: 48301602-3
Major Diameter 3"
Cutting Edge Length 4" (requires approx 4-1/2" clearance under spindle nut)
Uses 15 x 15 x 2.5 KN 400 inserts
Bearing included & Spacer Included
Wrench included
Box included
Bore 3/4"
Balanced and verified
Made in USA by Byrd Tool #48301602-3
4 lbs
Black Oxide Finis..
$315.25
In Stock
Brand: Byrd Tooling
Model: 48301202-5-BB
Major Diameter 3"
Cutting Edge Length 3"
Uses 15 x 15 x 2.5 inserts
Bearing included
Price includes .035" shim (always run between bearing and head)
Wrench included
Box included
Bore 1-1/4"
Balanced and verified
Made in USA by Byrd Tool #48301202-5
5 lbs
Black Oxid..
$265.25
Typically in Stock
Brand: Byrd Tooling
Model: 48301602-5
Major Diameter 3"
Cutting Edge Length 4"
Uses 15 x 15 x 2.5 Carbide inserts 4" Radius
Box and Wrench included
Bore 1-1/4"
Balanced & Verified
Made in USA
Byrd Part #48301602-5
Black Oxide Finish
Useful in other woodworking applications...
$273.00
Typically in Stock
Brand: Byrd Tooling
Model: 48301602-5
Major Diameter 3"
Cutting Edge Length 4"
Uses 15 x 15 x 2.5 Carbide inserts 4" Radius
Matched Indexed Bearing included
Box and Wrench included
Bore 1-1/4"
Balanced & Verified
Made in USA
Byrd Part #48301602-5
Black Oxide Finish
Useful in other woodworking applications...
$312.99
In Stock
Brand: Byrd Tooling
Model: KN400 SM-HL
If your shelix is about 12 years old, you may have the old version of the kn400 tip which has the same outer geometry but has a smaller hole and uses a smaller screw with 10/32 pitch (not the 8/32 pitch)
The OD is approx 6.15mm whereas the newer opening is 6.70mm. The inserts are not interchangeab..
$35.75
In Stock
Brand: Byrd Tooling
Model: 48400803-5
New in the Box, loaded with Carbide inserts , instructions and wrench.
2" cut length, 4" diameter, 1-1/4" bore.
..
$147.00
Typically in Stock
Brand: Byrd Tooling
Model: 48300802-4
New in the Box, loaded with Carbide inserts , instructions and wrench.
2" cut length, 3" diameter, 1" bore.
..
$147.00