Produce your own flooring in house. Matches WT25L Stock is run from right to left face down (side that is sanded) with cutter rotating clockwise Precision ground steel cutter groove body 3 wing with tips:   4-7/8" DIA. X 3 W ING  1-1/4" - 40MM - AND  1-1/2" DIA. BORE  4-7/8" DIA. X 3 WING 1-1/4" bore (other bores available such as - 40MM - ..

        List for $ 254     Bore 3/4" 1/2" Reducing T bushings included Made by Amana Tools #SC450 3 lbs          ..

Your tool will arrive ready for production or properly protected to store for that unique job.     List for $ 291   Bore 1-1/4" Brand New Limited Stock at this price! 1" reducing T bushings included Made by Amana Tools #SC451 3 lbs..

Genuine OEM BYRD INSERT Plows bottom of floor to stablize board.  This is the round back out insert which attaches to the BYRD Holder (sold seperately) Approx 14MM Carbide CNC ground insert price is for 1 insert ..

Genuine OEM BYRD INSERT Stock is run from right to left face down (side that is sanded) with cutter rotating clockwise 1-1/4" - 40MM - AND  1-1/2" DIA. BORE  Stock up to 1-1/8" (the knife is 30mm wide) Carbide CNC ground insert price is for 1 insert Heads use 3 inserts..

Single Insert for Byrd Flooring Cutter Carbide CNC ground insert from Byrd FOR 3/4" WOOD  Produces groove in wood face up on Right molder or shaper  head spinning CCW or face down on Left molder head spinning CW..

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. 2 3 wing heads .  A 3 knife tongue head and a 3 ..

Single G25L Insert for Byrd Flooring Cutter Carbide CNC ground insert which matches the T25 profile ..

Single G25VR1 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialSmallest Bevel 1/16" V opening in floor boardsMin Order 3 pc..

Single G25VR3 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialLargest Bevel 3/4" V opening in  boards, typically used for panelingMin Order 3 pc..

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. 2 3 wing heads .  A 3 knife ton..

Single T25R  Insert for Byrd Flooring Cutters Carbide CNC ground insert from Byrd ..

Single T25VL1 Insert for Byrd Flooring CuttersFor 3/4 stock 1/16" wide bevel-Micro" great for prefinished flooring Carbide CNC ground insert from Byrd Min Order 3 pc..

Single T25VL3  Insert for Byrd Flooring CuttersFor 3/4 stock 1/4" wide bevel Carbide CNC ground insert from Byrd Min Order 3 pc..

Single Insert for Byrd Flooring Cutter Carbide CNC ground insert from Byrd FOR 3/4" AND 5/8" WOOD WITH 1/16" REVEAL ..