Specifications:  - 59/64 In.   - 3/4 In.  -  9/16 In.  Description: Porter Cable 42039 Template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed...

Number of Flutes 2 Overall Length(L) 2-1/2 Shank Diameter(d) 1/4 Length of Cutting Edge(B) 1 Cutting Edge Diameter(D) 1/4 Material Being Cut Hard Plywood , Hard Wood , Soft Plywood , Soft Wood, Composite   Material Being Cut       Excellen..

Product Description Whiteside-1980  Round Over Router Bit   1/4" shank Carbide Tipped 1/2"radius 1-1/2"diameter   1/4" shank Carbide Tipped1/8" Radius      An extra small brass pilot (5/32" diameter) allows this bit to round over edges on finely detailed work pieces with intricate contours, tight corners, and narrow openings. Get professional r..

  Product Description Template Router Bits (Bearing Guide - 1/4 Shank, Carbide Tipped - Whiteside 3000: 1/2 Cutting Diameter, 1/4 Cutting Length, 1-7/8 Overall Length, B9 Bearing Number Made in U.S.A. Whiteside (Actually Whiteside Machine) is regularly rated as #1 for cut quality and #1 for value by Fine Woodworking magazine. Template Router B..

  Product Description Template Router Bits (Bearing Guide - 1/4 Shank, Carbide Tipped - Whiteside 3000: 1/2 Cutting Diameter, 1/4 Cutting Length, 1-7/8 Overall Length, B9 Bearing Number Made in U.S.A. Whiteside (Actually Whiteside Machine) is regularly rated as #1 for cut quality and #1 for value by Fine Woodworking magazine. Template Router B..

Product Description Template Router Bits (Bearing Guide - 1/4 Shank, Carbide Tipped - Whiteside 3000: 1/2 Cutting Diameter, 1/4 Cutting Length, 1-7/8 Overall Length, B9 Bearing Number Made in U.S.A. Whiteside (Actually Whiteside Machine) is regularly rated as #1 for cut quality and #1 for value by Fine Woodworking magazine. Template Router Bits..

  Product Description Template Router Bits (Bearing Guide - 1/4 Shank, Carbide Tipped - Whiteside 3000: 1/2 Cutting Diameter, 1/4 Cutting Length, 1-7/8 Overall Length, B9 Bearing Number Made in U.S.A. Whiteside (Actually Whiteside Machine) is regularly rated as #1 for cut quality and #1 for value by Fine Woodworking magazine. Used wit..

Providing state-of-the-art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.Materials: Natural woods, composites, hard plastics, thin aluminumSIMILAR SIZESPart #Shank Dia.Cutting Dia.Cutting LengthF..