Byrd Corrugated Knife Heads

Byrd Corrugated Knife Heads








The corrugated back shaper heads are a very good alternative to the old style shaper collars in many applications. They are much less expensive and easier to use. They are excellent for short run jobs where you need to make your own knives.

Grid View:
Quickview

Byrd cutter head for corrugated knives 2'' cut length 4'' Diameter, Bore 1.25'' 2 knives

$139.00

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 2" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Quickview

Byrd cutter head for corrugated knives 3'' cut length 4'' Diameter, Bore 1.25'' 2 knives

$167.99

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 3" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Quickview

Byrd cutter head for corrugated knives 4'' cut length 4'' Diameter, Bore 1.25'' 2 knives

$195.99

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 4" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Quickview

Byrd cutter head for corrugated knives 5'' cut length 4'' Diameter, Bore 1.25'' 2 knives

$229.00

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 5" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Quickview

Byrd cutter head for corrugated knives 6'' cut length 4'' Diameter, Bore 1.25'' 2 knives

$249.00

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 6" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Showing 1 to 5 of 5 (1 Pages)