Freeborn, count on the best! Diameter (D) 3-1/4" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  New in packaging balanced and verif..

Freeborn, count on the best! Diameter (D) 4" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  New in packaging balanced and verified ..

  Diameter (D) 62mm fits the amana 61292 & 61293 designed for hub style shaper cutters such as found with all amana , freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  New in packaging balanced ..

Byrd, count on the best! Diameter (D) 4"** indexed to your shelix (may fluctuate .001)  In other words, when you order a shelix and you want a bearing, you need to have the bearing matched to the shelix.  The OD may range on the shelix shaper head by +/- .003 so get the bearing indexed to the shelix at time of purchase Bore 1-1/4"  requires or..

Byrd, count on the best! Diameter (D) 3 for use with stock 3/4" bore stile and rail sets. Bore 3/4" ..

Byrd, count on the best! Diameter (D) 3-1/2  for use with stock 1-1/4" bore stile and rail sets. Bore 1-1/4" ..

1/4" x 3/8" Tongue Made in the USA..

Freeborn, count on the best! Diameter (D) 1-5/8" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 3/4"  New in packaging balanced and verifie..

Freeborn, count on the best! Diameter (D) 1-11/16" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 3/4" typically used with..

Freeborn, count on the best! Diameter (D) 2-3/16" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 3/4"  New in packaging balanced and verifi..

Freeborn, count on the best! Diameter (D) 2-15/16" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 3/4"  New in packaging balanced and verif..

Freeborn, count on the best! designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.   Creates a 1/4" thick x 3/8" long tenon using Freeborn Top Groovers (4" OD). Helps in fence alignment (use a straight edge on both fences and the outer diameter of the rub spacer for perfect tenon length) Spindle ..

Freeborn, count on the best! Diameter (D) 2-1/4" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  New in packaging balanced and verif..

Freeborn, count on the best! Diameter (D) 2-1/4" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  1/2" thick New in packaging balanc..

Freeborn, count on the best! Diameter (D) 2-3/4" designed for hub style shaper cutters such as found with all freeborn and other high quality tooling.  If your shaper cutter is flat on the top, you will need a small shim(not included) to offset cutter head and bearing. ask us, we have them.   Bore 1-1/4"  New in packaging balanced and verif..