Menu
Your Cart

Byrd Corrugated Knife Heads

Byrd Corrugated Knife Heads








The corrugated back shaper heads are a very good alternative to the old style shaper collars in many applications. They are much less expensive and easier to use. They are excellent for short run jobs where you need to make your own knives.

Byrd cutter head for corrugated knives 2'' cut length 4'' Diameter, Bore 1.25'' 2 knives
Typically in Stock
Brand: Byrd Tooling Model: 41400802
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 2" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
$123.99
Byrd cutter head for corrugated knives 3'' cut length 4'' Diameter, Bore 1.25'' 2 knives
Typically in Stock
Brand: Byrd Tooling Model: 41401202
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 3" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
$149.99
Byrd cutter head for corrugated knives 4'' cut length 4'' Diameter, Bore 1.25'' 2 knives
Typically in Stock
Brand: Byrd Tooling Model: 41401602
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 4" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
$169.99
Byrd cutter head for corrugated knives 5'' cut length 4'' Diameter, Bore 1.25'' 2 knives
Typically in Stock
Brand: Byrd Tooling Model: 41402002
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 5" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
$206.00
Byrd cutter head for corrugated knives 6'' cut length 4'' Diameter, Bore 1.25'' 2 knives
Typically in Stock
Brand: Byrd Tooling Model: 41402402
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 6" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
$227.00
Showing 1 to 5 of 5 (1 Pages)