Paneling

Grid View:
Quickview

3-3/4" Fluted Casing Corrugated Back molding knives

$158.00

Good Used 3-3/4" Fluted Casing    Details:  Set of two knives  Made in the USA by CCG Schmidt & Co.  Fits shapers ..

Quickview

Freeborn PC-19-020 7 pc Flooring /Paneling Shaper Cutter set

$652.80

Cut provides a loose fit (.030) for wood expansion. Set up instructions included. Counterclockwise rotation with wood fed face down or Clockwise wood face up  Produces 5 joints for nearly all customer needs.  Flooring to Paneling  Material to 1-1/8”. Part A and B are both run flat in horizontal position on shaper..

Quickview

M2 Corrugated Back Crown Molding Knives

$175.00

Set of two corrugated back knives with crown molding profile.  5/16" M2 Steel..

Quickview

M2 corrugated back knives standard T and G for shaper or Molder

$145.00

Brand New M2 HSS knives professionally ground on Weinig by master tool man.  Produces  loose fit (not a glue joint) Order contains 2 16/60 degree  corrugated back knives, Template  & printed layout sheet. Suitable for shapers and small molder knife heads...

Quickview

M2 corrugated back knives WM 445 Casing for shaper or Molder

$160.00

Brand New M2 HSS knives professionally ground on Weinig by master tool man.  Produces the well regarded wm 445 casing 11/16 ( you can change per your desired thickness) x 3-1/4" seen in many homes throught America  Order contains 2 16/60 degree  corrugated back knives, & printed layout sheet. Acrylic sharp..

Quickview

M2 corrugated back knives Wood Paneling WP4 for shaper or Molder

$260.00

Brand New M2 HSS knives professionally ground on Weinig by master tool man.  Produces paneling or siding with loose fit (not a glue joint) Order contains 4 16/60 degree  corrugated back knives, & printed layout sheet. Acrylic sharpening templates included  Suitable for shapers and small molder knife hea..

Quickview

M2 corrugated back molding knives 3/4 x 4" Edge and Center Bead Ceiling

$167.20

M2 HSS knives professionally ground on Weinig by master tool man. 3/4" x 4" Face Knives for edge and center bead  Package includes 2 M2 HSS knives, sharpening template and layout sheet Corrugated knives-balanced & matched 5/16" 16-60  High Speed Steel sharpening template included shipping 1 lb    ..

Quickview

Magic Molder Plugs P-1 N-1 Table Saw amd shaper straight 1 inch cut

$169.99

N-1 P-1 molder plug Straight Cut Profile for cutting grooves one inch wide and up to 1/2 inch deep. It also cuts on the side and can be used to make rabbet cuts as wide as one inch.   P-1  Lists for $139             ..

Quickview

Magic Molder Plugs P-3 N-3 Table Saw & Shaper Cutter carbide tip Convex V Point

$169.00

 Convex V Point Profile creates a vee groove in face frames or cabinet doors. The 45 degree angle on each side can also be used to cut a chamfer up to 5/8 long.   P-3             ..

Quickview

Magic Molder Plugs P-43 N-43 Table Saw & Shaper Cutter carbide tip Beaded Face Frame

$149.99

Beaded Face Frame Profile forms a bead and 1/8 flat on the side of the bead. Good for creating bead on the edge of a board and trimming the edge of the board.   P-43  Lists for $139             ..

Quickview

Panel Molding Shaper Cutter 1-1/4

$134.00

Made by Forest City Tool in the USA  Specifications: Cutter Diameter: 6" Cutting Length: 2-1/2" Bore:1-1/4" (With included t-bushings. Orginal bore is 1-13/16") Clockwise rotation Medium to Large shapers   New Old stock Condition:  Never Sharpened or used   Clean, sharp, and ready to use ..

Quickview

QuickLock Bead Profile Knife Profile Knife

$42.37

  Bead Profile profile knives Made fom solid carbide package contains 1 knife Fits 9100 Style Heads..

Quickview

Wainscoting shaper knife package Set of 3

$370.00

Set of three corrugated back profile knives for shaper head 5/16" M2 Steel suitable for small shaper heads with 5/8" pockets..

Showing 1 to 13 of 13 (1 Pages)