Brand: Ceratizit
Model: 11852107
MG18 Grade
ceratizit # 11852118
100mm TerminusTM Style Knives14.1mm Wide x 2.56mm Thick
Carbide MG18 Grade
Brand: Ceratizit # 11852107
Made in Germany
Replaces Titan DT 100C3..
$39.99
Brand: Ceratizit
Model: 11852112
MG18 Grade
ceratizit # 11852118
130mm TerminusTM Style Knives 14.1mm Wide x 2.56mm Thick
Carbide MG18 Grade
Brand: Ceratizit # 11852112
Made in Germany
Replaces Titan DT 130C3
Replaces Terminus Carbide # 9640130..
$51.30
Brand: Ceratizit
Model: 80332377
Longest side 28mm point to point x shortest side 16mm point to point measured on a skew L =14mm x W= 14mm x 2mm - 4 Cutting Edges Grade HC05 Tigra part# cross reference 013258 (fits many rebate spurs,) Holes 1 : 6.5mm Bevel: 30 degree Sold in packs of 10 only Plastic Case included Made in Luxembo..
$75.70
Brand: Ceratizit
Model: 11852113
MG18 Grade
ceratizit # 11852118
150 mm Terminus TM Style Knives14.1 mm Wide x 2.56 mm Thick
Carbide MG18 Grade
Brand: Ceratizit # 11852107
Made in Germany
Replaces Titan DT 150C3..
$48.82
Brand: Ceratizit
Model: 82022498
NT-20-10HCVS 20” Singlehead Planer uses 2 spiral inserts. The insert which comes on the 20" single head planer is a straight insert which measures 15mm x 15mm x 2.5mm. It has vey small rounded corners, make sure you check the knife to determine if its straight. The Northtech part # on the redbox ..
$4.19
Brand: Ceratizit
Model: 82001124
edges : straight (not a radius) with pointed sharp corners This insert has a straight cutting edge on all 4 sides. Fits many spiral cutters. Always double check specs before ordering or installing.
Width=15mm
Length =15mm
Grade MG18 (same as Tigra's T10MG)
Exact Match to Tigra 13315 Insert
Thickne..
$49.50
Brand: Ceratizit
Model: 11827613
15mm x 15mm x 2.5mm - 4 Cutting Edges : 150mm radius on all 4 sides with rounded corners
Engraved numbers on all corners (will not rub off as some laser etched inserts are prone when milling certain materials)
Grade CTOPP10
Matches Tigra 101540 in size and Carbide Grade
(fits many spiral heads..
$48.24
Brand: Ceratizit
Model: 12112633
15mm x 15mm x 2.5mm - 4 Cutting Edges : 150mm radius on all 4 sides with rounded corners
Engraved numbers on all corners (will not rub off as some laser etched inserts are prone when milling certain materials)
Price per insert, min order 10
Grade KCr08
Matches Tigra 101540 in size and Carbide Grad..
$3.99
Brand: Ceratizit
Model: 11852118
MG18 Grade
ceratizit # 11852118
180mm TerminusTM Style Knives14.1mm Wide x 2.56mm Thick
Carbide MG18 Grade
Brand: Ceratizit # 11852118
Made in Germany
Replaces Titan DT 180C3..
$69.99
Brand: Ceratizit
Model: 11852126
MG18 Grade
ceratizit # 11852118
230mm Terminus Style Knives14.1mm Wide x 2.56mm Thick
Carbide MG18 Grade
Brand: Ceratizit # 11852126
Made in Germany
Replaces Titan DT 230C3 / TK230C3..
$97.30
Brand: Ceratizit
Model: 80360024
Width=12mm
Length =24.7mm
Thickness=1.5mm
Grade :Kcr08
Holes 2 : 4mm diameter 14mm on center
bevel: 35 degrees
Plastic Case includes 10 knives
Made in Germany
Composition:Co + Ni 4.2%, WC balance, Other 0.35%Grain size:Submicron grain 0.5 - < 0.8 µmTransverse rupture strength:2300 MPa..
$54.99
Brand: Ceratizit
Model: 80359561
Can this replace my standard 30mm insert with just 2 holes? Yes, Ceratizit has lightened the insert to save weight and be more environmentally sound. Its lighter on the bearings for your machine. It will fit any head that uses the standard 30mm gibb with 2 pins. The bevel is 35 degrees.
Width=..
$54.99