Product Description Tongue & Groove Router Bit Assembly for 1/2" to 13/16" Material Thickness (One Tool Makes Both Cuts) 1-5/8" Large Diameter, 9/32" Tongue Width, 1/2" Shank, B5 Bearing       -         Whiteside3375       From the Manufacturer Shop tip: Excellent for table routing dadoes.      ..

501 ROUNDOVER & BEADING 1/2" SHANK Product Information Roundover bits are by far the most used edge forming bits in woodworking. This set offers the most common radii (R1/4”, R3/8”, R1/2”) in 1/2” shanks, plus a hefty 3/4” radius workhorse. Extra bearings and wrench are included to convert each bit from Rounding over to Beading - i.e., Roundover w..

502 ROUNDOVER & BEADING 1/4" SHANK Product Information Easily round off all your square edges with lightweight 1/4” capacity hand routers. Keep the whole range of sizes (R1/8”, R3/16”, R1/4”, R3/8”, R1/2”) neatly organized and right at your fingertips. As with the 1/2” shank set, this kit comes fully equipped to extend its usage b..

6002 OGEE STILE & RAIL SET 1/2"SH, 7/8"CL, 3/8" REVEAL Product Description Make full size Stile and Rail joints on your router table. The interlocking design plus the raised panel groove are both cut in one pass. Ball bearing guides control the cutting depth and also allow use on rounded, arched, or special shaped doors. With these two piece sets,..

  Product Description Steel Router Collets, Reducer Bushings, 1/4 I. D., 1/2 O. D., 1-1/4 Overall Length  - Whiteside 6400            ..

  Product Description Slotting Cutters -3 Wing - Kerf 0.125 (1/8)- 1-7/8 Cutting Diameter, 5/16 Bore- Whiteside 6705A            ..

  Product Description  Slotting Cutters - 3 Wing - Kerf 0.187 (3/16) - 1-7/8 Cutting Diameter, 5/16 Bore -  Whiteside6709a       From the Manufacturer Shop tip: Excellent for table routing dadoes.      ..

  Product Description Slotting Cutter Arbors (Includes B5 Bearing For 1/2 Depth Of Cut),  1/2 Shank, 5/16" arbor diameter, 7/8" arbor length, 2 3/8" overall length -  Use B20 Bearing for 9/16 depth of cut, B25 for 3/8, B26 for1/4      -         Whiteside A210B       From the Manufacturer    ..

  Product Description Template Router Bits (Bearing Guide - 1/4 Shank, Carbide Tipped - Whiteside 3000: 1/2 Cutting Diameter, 1/4 Cutting Length, 1-7/8 Overall Length, B9 Bearing Number Made in U.S.A. Whiteside (Actually Whiteside Machine) is regularly rated as #1 for cut quality and #1 for value by Fine Woodworking magazine. Used wit..

  Product Description Useful for a wide variety of applications including beaded face frame, base, door edges, popular profile since colonial days              Overall Length   Cutting Circle     Cutting Edge Length   Shank   Part # 2-1/4"  7/8"  9/16"  1/2"  3246      Whiteside Machine Company has been in business for over..

Providing state-of-the-art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.Materials: Natural woods, composites, hard plastics, thin aluminumSIMILAR SIZESPart #Shank Dia.Cutting Dia.Cutting LengthF..

Product Description These router bits are sized to exactly match today's nominal plywood thicknesses. 7/32-inch bit for 1/4-inch Plywood31/64-inch bit for 1/2-inch Plywood23/32-inch bit for 3/4-inch Plywood Precision ground for proper balance at high RPM Bits Included:Whiteside SC218 - 7/32in Dia, 3/4in Cutting Length, 2-3/4in OALWhiteside ..

Product Description Spiral Bits feature a continuous shearing action that provides a very smooth cut, and efficiently remove chips either up or down according to type of cutter selected. FYI when used in a router table, the opposite effect will happen. Upcut Spiral Bits help to hold the material down when used in a router table. Solid carbide 2 flu..

  Product Description Straight Cut, Spiral Router Bits - ,  - Whiteside RU5150              Overall Length   Cutting Circle     Cutting Edge Length   Shank   Part # 3"  1/2"  1-1/2"  1/2"  RU5150   From the Manufacturer Shop tip: Excellent for table routing dadoes.      ..

  WHITESIDE MACHINE 1083 CARBIDE-TIP 2 FLUTE ROUTER BIT 11/16" DAI X 1-1/4" CL X 1/2" SHANK   New!!!  Made in USA by Whiteside #1083  1 lbs No packaging (whiteside plastic sleeve/envelope) or directions Useful in other woodworking applications.    ..