It will fit any head that uses the standard 50mm gibb with 2 pins.  The bevel is 35 degrees.  Width=12mm Length =50mm Thickness=1.5mm Grade :Kcr08 Holes 2 : 4mm diameter 26mm on center bevel: 35 degrees Plastic Case includes 10 knives Made in Germany   Application: fits many 50mm rebate heads from Leitz, Saturn, I..

      Width=13mm Length =80mm Thickness=2.2mm bevel: 35 degrees Grade:T08MF Plastic Case includes  10 knives Made in Germany..

For Amana  tooling Package contains 1 screw    ..

For Amana  Insert  CNC Insert Carbide Up & Down Shear Router Bit  RC-2304 Why Pay Amana, Amazon etc  $9.99-$12.99 for the same RCK-28  insert? Trust Oella for OEM quality without all the mark ups.  Saving you money on every insert is our mission! Mg06 C4 Carbide package contains 10 blades   Direct Fit on your Amana Tool  Made in Europe 28 mm..

For Amana  Insert  CNC Insert Carbide Up & Down Shear Router Bit  RC-2300   16mm x 7mm x1.5mm  Thick - 3-edge Carbide Insert 10Pcs Amana RCK-16 Why Pay Amana, Amazon etc  $9.99-$12.99 for the same RCK-16  insert? Trust Oella for OEM quality without all the mark ups.  Saving you money on every insert is our mission! Mg06 C4 Carbide  Direct Fit ..

NT-610XL-30Z  and other XL planers use a 30mm x 12mm x 2.5mm (don't get confused with the common 30x12x1.5, it will not work)  You need the 2.5mm thicknes. The Northtech part # on the chinese made brand may be IC-251-230  Price is for 1 single insert, some photos show a case of 6 for illustrative purposes only Length =30mm Width=12mm Thickness..

Kit includes 70 OEM knives and 4 extra screws to replace the entire 16" Xylent (Xilent) head found on SCM and Minimax surface planers OEM Supplier Grade: CttopRadius :  95mmHole .26"The 410mm (16") Xylent cutterhead has 66 knives total.The 520mm (20") Xylent cutterhead has 84 knives total.The 630mm (24") Xylent cutterhead has 105 kn..

These  carbide inserts measure 14mm x 14mm x 2mm and are sold in a 10 pack. These carbide inserts are for our W1718 SHOP FOX 20" SPIRAL PLANER. Specifications:  14mm x 14mm x 2mm Carbide 10 Pk. Designed to fit W1705, W1718, W1741S, W1741SW, W1742S, W1742SW, W1744S, W1754S, W1754SW, W1755S Grade KCr08, great all around ..

Our inserts are German made, razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. Made in Europe 14mm x 14mm sq. x 2mm thick with a 4.00 mm diameter hole for mounting and a 35 degree cutting bevel. .551” x .551” x .059” thick with a .248” dia. countersink moun..

  Round Carbide turning  Knife - 11mm Diameter x 4mm Thick x 5.1mm Hole...

  15mm x 15mm x 2.5 mm - 4 Cutting Edges : radius on all 4 sides with micro radius corners Grade CTOPP10 Same insert as Woodmaster 100171 replacmenent bit for their spiral head Sold in packs of 10 only Plastic Case included Made in the European Union Composition:Co 4.0%, WC balanceGrain size:Fine grain 0.8 - < 1.3 µmTransverse rupture streng..

Made in Luxembourg, razor-sharp for an exceptional finish. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. Made in Europe 12mm x 12mm sq. x 1.5mm thick with a 4.00 mm diameter hole for mounting and a 35 degree cutting bevel. .472” x .472” x .059” thick with a .157” dia. mounting hole KCR08  Grad..

Always in stock razor-sharp for an exceptional finish. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. Made in Europe, Our Industrial version has an embossed square used to help keep track of how many sides you have left   Kit contains 3 inserts for a complete overhaul. KCR08  Grade Carbide..

One of our best sellers, used in many cutter heads, Perfect match H7319 14mm x 14mm x 2mm - 4 Cutting Edges : square on all 4 sides with sharp points Grade KCr08, great all around grade of carbide, slightly better performance than Hc05, very good on HDF,MDF, Softwood, Optimal for Hardwood and Chipboard The performance benefits reduce the f..

One of our best sellers, used in many cutter heads,  14mm x 14mm x 2mm - 4 Cutting Edges : square on all 4 sides with sharp points This is the carbide blend that matches closely to the older Ctopp grade, a favorite grade for those milling rougher wood. Grade KCR18+, great all around grade of carbide, slightly better performance than Hc05, ve..