Oella Saw and Tool is proud to offer a swiss made precision machined  industrial carbide 2 piece groover with spacers, designed for production. Material: Soft and hardwood along and across grain, timber products.   Diameter: 160 mm 6-5/16" (180mm version has been discontinued by Amana ) groo..

Amana Tool Carbide tipped double edge folding V-groove & rectangular groove (for thicker walls) industrial router bits for shaping Aluminum Composite Materials (ACM) such as Alucobond®, Dibond® and other brands alike. Designed for scoring the following aluminum/plastic composite materials with 90°, 108°, 135° angles (wi..

Suitable for producing ‘finger style’ reversible glue joints in softwood, hardwood and man-made boards on a spindle molder. 1-1/4" Borereplaces 61264 (discontinued) 120mm diameter 60mm cutting edge length  This cutter can Joint stock up to 60mm (about 2-3/8 inches)  . Aluminum  Body, Carbide insert New In The boxReplacement inse..

package contains 1 blade Direct Fit on your Amana Tool 61362, 61366 edging knife Made in Germany 11.6 mm  x 12mm x 1.5 mm - 2 Cutting Edges :    Plastic Case included when you buy 10   Composition: Co 3.3%, WC balance, Other 0.62% Grain size: Submicron grain 0.5 - < 0.8 μm Transverse rupture strength: 3300 MPa 479.000 P.S.I. Hardness..

 3 Part Insert Adjustable Grooving Shaper Cutter with Scorer 4mm - 15.5mm Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder.  Cutting width can be adjusted i..

Number of Flutes 2 Overall Length(L) 2-1/2 Shank Diameter(d) 1/4 Length of Cutting Edge(B) 1 Cutting Edge Diameter(D) 1/4 Material Being Cut Hard Plywood , Hard Wood , Soft Plywood , Soft Wood, Composite   Material Being Cut       Excellen..

This stackable finger-jointing tool is an open-design cutter with no limitation on chip size. As such, it’s a high-production, high-performance tool to be used only with an automatic or power feed. The tool features a 3-wing solid-steel cutterhead that takes replaceable carbide knives. Each cutter will cut up to 40mm high and 10mm deep. Stack two o..

Hard wearing aluminum body complete with spiral positioned tungsten carbide knives. Produces cuts so smooth it practically eliminates sanding. The secret is in the spiral pattern of the twelve individual knives. Unlike conventional cutterheads, there is always a knife in contact with the surface of the stock. This unique design totally eliminates t..

For sanding rough workpieces by means of template under use of a ball bearing as a rub collar. 2-3/8" x 1-1/4" Bore  extra abrasive pads sold seperately @6.29 each *************optional amana # 61596 rub collar not included but high recommended************** To add it to cart, click here Shipping to Canada is extra         ..

Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm increments by special threaded bushing and scale without removing the..

Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and slots in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm increments by special threaded bushing and scale without removing the..

  Amana 61350- Adjustable grooving With Scorer 4mm to 7.5mm. Hard wearing steel body with tungsten carbide knives and scorer for inproved finish.  Suitable for producing various thickness grooves and slots in softwood,Hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm increments b..

  Amana 61350- Adjustable grooving With Scorer 4mm to 7.5mm. Hard wearing steel body with tungsten carbide knives and scorer for inproved finish.  Suitable for producing various thickness grooves and slots in softwood,Hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm increments b..

2-wing straight cutters featuring aluminum alloy body, 2-sided carbide insert knives and four, 4-sided spur knives for a super clean finish. Choose either 30MM cutting height.  Tool No. D B d RPM Ideal/Max 61460 100MM (4") 30MM (1-3/16") 1-1/4" 7600/12000   Replacement Parts ..

2-wing straight cutters featuring aluminum alloy body, 2-sided carbide insert knives and four, 4-sided spur knives for a super clean finish.  50MM cutting height.  Tool No. D B d RPM Ideal/Max 61462 100MM (4") 50MM (2") 1-1/4" 7600/12000   Replacement Parts Order No.  Des..