Menu
Your Cart

Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter

 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
Typically in Stock
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
 Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter
  • Stock: Typically in Stock
  • Brand: Freeborn Tools
  • Model: PC-28-020
  • Weight: 6.00lb
  • Dimensions: 6.00in x 6.00in x 8.00in
  • SKU: PC-28-020
Products Sold: 7
Product Views: 1006
$395.00

Freeborn PC-28-020 Single Tongue & Groove Lock Mitre Shaper Cutter


Outside diameter 4 1/2"
4"OD available by special order
Minor Diameter 3 1/2"
1 1/4" Bore
Versatile and easy-to-use.  These 6 cutter sets are designed to perform the 3 functions shown. Freeborn's standard sets cut 1/4” wide 
x 3/8” deep tongue and groove. Counterclockwise rotation with wood fed face down.

Produce lock miters for easy alignment of corners with plenty of glue surface.

only. Mini-Pro is made to 
run only on 3/4” spindle.
Material to 1-1/8”. 
Part A and B are both run 
flat in horizontal position 
on shaper table. Part B is 
run again on table saw to 
cut groove (see diagram)

Counterclockwise rotation only. Material to 1-1/8”. Part A and B are both run flat in horizontal position on shaper table. Part B is run again on table saw to cut groove (see diagram) For 1” to 1-3/8”  stock


3 wing

5-3/8" diameter

Sherwin Williams urethane  painted oem Freeborn Orange

1 1/4" Bore

Material up to 1-1/8"

Carbide tipped

Made in USA by Freeborn Tools

3 piece set


Write a review

Note: HTML is not translated!
Bad Good
Captcha