Nap Gladu Sidewinder  4 total pockets: 2 planing pockets, 2 profile pockets, 2 knife holder pockets for inserts

S4S, good light use, cutter will work out of the box.  One small nick on one wing on far edge outside.  

Knives, gibbs and screws  are available

Outer Diameter - 127 mm

Cutting Length - 150 mm

Bore - 1-13/16 (1.8125 / 46.0375mm)

Brand - Nap/Gladu

1. Precision grinding & precise location act as one continuous cutting edge
2. Eliminates the possibility of “lining” the finish of your wood.
3. More “effective” wings means faster feed rates than traditional insert tooling.
4. Quiet
5.  Comes with 2 reference engraver dove tail cutters 
    

Excellent tool life in natural wood • Recommend 20-30 ft/min per wing at 6000 rpm or .040”-.060” chip load for good finish when planing natural wood.

Excellent finish quality •

Insert sharpening and replacement • Inserts must be finish ground in the cutter head after replacement inserts are installed. Send to service center for re-tip unless customer has ability to true up insert faces on CNC grinder. • Customer may sharpen inserts multiple times with suitable manual profile grinder. Approximately 1mm (.04”) stock removal allowance for sharpening