Search

SHELIX FOR DELTA DC-580  20" Planer/Molder DIMENSIONS: 3.25"CC 20"CL 29.293"OAL SHELIX FOR DELTA DC-580 WITH BEARINGS   Freight costs for USA, Canadians will be billed seperately for shipping..

Upgrade your Reliant DD39C 's 3 knife head with a spiral . Better performance, easier maintenance, much smoother cuts without all the noise..  2.554"CC 5W 5.921"CL 9.464"OAL SHELIX FOR RELIANT DD39C WITH 2 New BEARINGS..

Screwdriver type  : T-25+ Torx TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows th..

New in the Box, loaded with Carbide inserts , instructions and wrench. 3" cut length, 3" diamter, 1-1/4" bore.  Bearing not included We stock this  shelix head with bearings which are indexed to the head.  We have to get the head in from byrd if you order just the shelix head as we can't seperate the bearing and head p..

Byrd, count on the best! Diameter (D) 3-1/2  for use with stock 1-1/4" bore stile and rail sets. Bore 1-1/4" ..

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. Major Diameter 4" for 3/4" bore bodi..

Single T25R  Insert for Byrd Flooring Cutters Carbide CNC ground insert from Byrd ..

Single T25VL1 Insert for Byrd Flooring CuttersFor 3/4 stock 1/16" wide bevel-Micro" great for prefinished flooring Carbide CNC ground insert from Byrd Min Order 3 pc..

Single T25VL3  Insert for Byrd Flooring CuttersFor 3/4 stock 1/4" wide bevel Carbide CNC ground insert from Byrd Min Order 3 pc..

Single Insert for Byrd Flooring Cutter Carbide CNC ground insert from Byrd FOR 3/4" AND 5/8" WOOD WITH 1/16" REVEAL ..

Single T25VR3  Insert for Byrd Flooring Cutters Carbide CNC ground insert from Byrd  Min Order 3 pc..

Tired of Paying $142 a box for replacement knives.  Try our uncoated micro grain carbide inserts for your Norfield 2-1/8 lock bit. If you are not 100% pleased, send them back for your money back.  To date, now one has sent them back.   Width=12mm Length =25mm Thickness=1.5mm Holes 2 : 4mm diameter  14mm o..

 New 2 knife corrugated back shaper moulder head 3/4" Bore 3" cut Length 2-3/4" x 3" x 3/4" Major Diameter- 70mm ( 2-3/4") Cutting Edge Length- 80mm ( 3") Bore- 3/4" 15 degree hook angle, good choice for the combination of both soft (higher hook 20 degrees) and hard woods (lower hook 10 degrees) 2 knife model uses 1/4"..

  NEW!!! 20 degree hook diameter- 3-1/2" cutting edge length-50mm (2") wrench included 1" straight bore balanced can run 1/4", 5/16" (6mm-8mm) corrugated back steel 16-60 degree corrugations Made in USA..

15 degree hook diameter- 2-3/4" cutting edge length- 2" wrench included 3/4" straight bore   balanced     can run  1/4", 5/16" (6mm-8mm) corrugated back steel   16-60 degree corrugations Made in USA..