Search

1/4" Thick x 3/4" Tall x 25" Long Long Filler Wedge Steel - 60 Deg. Corrugated - Hardened 5140. To fill empty Corrugated knife pockets 2 pieces of filler stock,  (+/- 1/16") in length , cut and balanced in pairs used to fill any standard corrugated back head dual hook head.       PLEASE CHOOSE UPS AT CHECKOUT, This..

5/16" Thick x 1" Tall x 25" Long Long Filler Wedge Steel - 60 Deg. Corrugated - Hardened 5140. To fill empty Corrugated knife pockets 2 pieces of filler stock,  (+/- 1/16") in length , cut and balanced in pairs used to fill any standard corrugated back head dual hook head.  Best suited for larger shaper and molder heads   ..

40" x 1-3/8" x 1/8" [3mm] T1-HSS (18% Tungsten)  Planer Knife Set of 4 Made in Germany / Our best high speed knife we sell. Smooth Back, Bevel Edge**  Set of 4 Knives with one sharp edge and square bottom..

BACK ORDER Feb 15 2026   Major Diameter 3" (major means the outer most cutting diameter, tip to tip, its also the bearing OD) Cutting Edge Length 3" (with bearing, you need about 3-5/8" clearance under nut) Includes factory installed 15mm x 15mm x 2.5mm carbide inserts torques to 45 inch/lbs Factory matched to head diameter Bearing i..

Major Diameter 3" Cutting Edge Length 3" Uses 15 x 15 x 2.5 inserts Bearing included Price includes .035" shim (always run between bearing and head) Wrench included  Box included Bore 1-1/4" Balanced and verified Made in USA by Byrd Tool #48301202-5 5 lbs Black Oxide Finish Useful in other woodworking ..

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 2" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

For Shapers  2 Knife Steel Cutter Heads for 1" spindles. 3-1/2" Diameter 3" cut length 16-60° corrugations  Uses 1/4", 5/16"corrugated back steel..

Single G25VR1 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialSmallest Bevel 1/16" V opening in floor boardsMin Order 3 pc..

Single G25VR3 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialLargest Bevel 3/4" V opening in  boards, typically used for panelingMin Order 3 pc..

Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. Replacment Tips for Genuibe Byrd cutter heads.  Carbide, order comes with 3 carbide tips  Made in USA..

3.923"CC 11.964"CL 18.423"OAL SHELIX FOR GRIZZLY G9860, G9860Z, GENERAL 80-300 Comes with Bearings..

Comes with Factory(Byrd) installed bearings J162047..

The ORIGINAL SHEAR & HELIX and spiral cutter non-grind design.   Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary ..

2 Bearing Set We suggest replacing the bearings when you change out your head with the 3"CC 15"CL 20.312"OAL Shelix head. We will put one bearing on, and the other will require you to install when changing out your head.    ..

Bearings(2) are sold seperate.  Bearings  can be added to your order, please call or email your interest. Bearings are shipped with head but you will need to install them when you install head on your Delta.  They have to be off to accomodate assembly, otherwise we would put them on at no charge.  Its not a big deal, you can do ..