Search

2.625"CC 6.003"CL 9.405"OAL SHELIX Includes  BEARINGS This head will fit older Models with a cutting circle with blades of 2.625" .  Around 2004, the OD was reduced to 63mm or 2.480"  NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER.    THESE MODELS LISTED BELOW WILL HAVE TO MEASURED TO VERIF..

SHELIX FOR POWERMATIC P50 WITH 3/4" SHAFT 2.875"CC 6"CL 9.479"OAL SHELIX  SHAFT SIZE ON THE PULLEY END OF THE SHAFT WILL NEED TO BE VERIFIED BEFORE ORDERING..

Genuine BYRD SHELIX with Bearings for your Powermatic P-50 (3/4 SHAFT VERSION: MUST VERIFY BETWEEN 5/8 AND 3/4") 2.875"CC 6"CL 9.479"OAL SHELIX WITH BEARINGS Nice upgrade for your shop. Stop fussing with straight knife set ups.  ..

  Oella Saw answers the phone, we stock most of the P60's with bearings  and we have great prices, its hard to beat! ***********THIS P60 IS A  SPECIAL SIZE  CHECK YOUR OVERALL LENGTH AND VERIFY USE DRAWING ATTACHED******** 3.112"CC 5W 8"CL 11.345 " OAL SHELIX Includes 2 Premium Nachi bearings.  Make sure..

Upgrade your DELTA JT360 6-Inch Jointer with a genuine Byrd Shelix Head today.   Package comes with 2.48" Cutting Circle head (some Jt-360's had a 2.625" Cutting Circle), installed inserts, screwdriver with P25P tip, couple extra tips and Nachi Bearings.  All you need is the labor to change it out.  2 hours average changeout ..

Upgrade your Reliant DD39C 's 3 knife head with a spiral . Better performance, easier maintenance, much smoother cuts without all the noise..  2.554"CC 5W 5.921"CL 9.464"OAL SHELIX FOR RELIANT DD39C WITH 2 New BEARINGS..

New in the Box, loaded with carbide inserts ,and wrench. 4" cut length, 4" diamter, 1-1/4" bore.  Includes matched indexed rub bearing and Shim FREE DOMESTIC SHIPPING    ..

Single T25VL1 Insert for Byrd Flooring CuttersFor 3/4 stock 1/16" wide bevel-Micro" great for prefinished flooring Carbide CNC ground insert from Byrd Min Order 3 pc..

Single Insert for Byrd Flooring Cutter Carbide CNC ground insert from Byrd FOR 3/4" AND 5/8" WOOD WITH 1/16" REVEAL ..

Oella's special Flooring Package contains 2 Byrd insert heads and your choice of pattern.  You  can run 8 different tips on the same head.  Your purchase comes with 1 pattern, choose your stock  1/2" or 3/4" thickness and choose a reveal if any, reveals are 1/16", 1/8" and 1/4' For a Molder we suggest running your material f..

Tired of Paying $142 a box for replacement knives.  Try our uncoated micro grain carbide inserts for your Norfield 2-1/8 lock bit. If you are not 100% pleased, send them back for your money back.  To date, now one has sent them back.   Width=12mm Length =25mm Thickness=1.5mm Holes 2 : 4mm diameter  14mm o..

 New 2 knife corrugated back shaper moulder head 3/4" Bore 3" cut Length 2-3/4" x 3" x 3/4" Major Diameter- 70mm ( 2-3/4") Cutting Edge Length- 80mm ( 3") Bore- 3/4" 15 degree hook angle, good choice for the combination of both soft (higher hook 20 degrees) and hard woods (lower hook 10 degrees) 2 knife model uses 1/4"..

  NEW!!! 20 degree hook diameter- 3-1/2" cutting edge length-50mm (2") wrench included 1" straight bore balanced can run 1/4", 5/16" (6mm-8mm) corrugated back steel 16-60 degree corrugations Made in USA..

15 degree hook diameter- 2-3/4" cutting edge length- 2" wrench included 3/4" straight bore   balanced     can run  1/4", 5/16" (6mm-8mm) corrugated back steel   16-60 degree corrugations Made in USA..

NEW!!! 20 degree hook diameter- 3-1/2" cutting edge length- 80mm (3") wrench included 1" straight bore balanced can run 1/4", 5/16" (6mm-8mm) corrugated back steel 16-60 degree corrugations Made in USA..