Search

  The S100 dual hook line is designed for spindle shapers and most smaller non-jointed moulders.  Dual hook 12 and 20 When you have tearout problems, run the 12 degree hook side chestnut, cottonwood, cypress, elm(soft), hickory, maple, redwood, walnut, sycamore ,magnolia, pecan, & some plastics.for most other application..

Fits Many Leitz Rebate heads and other European tooling Priced per knife sold in packs of 10 Width=22mm Length =19.05 mm mm Thickness= 2 mm Holes 1 : 6.5 mm diameter   corner angle  60 degreesTigra # 013271 Plastic Case includes  10 knives Made in Germany..

  9200 Style. Part # TK-P9200VG Back out holder without knives (Knives sold seperately)..

  Fits 9200 Style. Part # TK-P9200VG-R and Left..

Swiss Made Wanner grease pump w/ Chain Barrel, 600 bar (M-06). Heavy duty model with rebuildable valve seats for pressurizing moulder heads, hydro-sleeves and other hydraulic tools Newest version 32391.20(Plastic handle as opposed to aluminum handle found on the older style) has a bigger valve with additional strainer (filter). The ..

Swiss Made Wanner grease pump, Rod Barrel  600 bar (M-06). Heavy duty model with rebuildable valve seats for pressurizing moulder heads, hydro-sleeves and other hydraulic tools New version (Plastic handle as opposed to aluminum handle found on the older style) has a bigger valve with additional strainer (filter). The strainer (filter)..

Weinig /Leitz Style - Centro-Star/Centro-Fix 12mm x 2.7mm wide Priced individually shipped in packages of 2 (min order 2pc) Please order in even quantities, 2,4,6,8,10 etc Single T1-18% Carbide High speed Steel knife with Black oxide coating for corrosion resistance. Made in Germany..

Weinig /Leitz Style - Centro-Star/Centro-Fix 12mm x 2.7mm wide  Per knife Single Solid Carbide. Save hundreds over Leitz Brand ID # 612024 without compromising quality. Made in Germany..

  Preowned   2-1/8" Genuine Weinig Arbor for early Rondamats Lists New $3058 Free Ground shipping Hard to find !   Arbor  2-1/8"  x 9-3/8" 240mm  Bearings solid. fits earlier rondamat profile grinders Made by Weinig Germany Actual Photos of item 1 of 2 Clamping arbor not included ($146 from Wei..

Product Description Straight Cut, Router Bits - , Carbide Tipped - Whiteside 1093                Overall Length   Cutting Circle     Cutting Edge Length   Shank   P..

1572POINT CUTTING ROUNDOVER BIT1/4"SH, 1/4"R, 1/2"CD, 1/2"CLProduct Description                Unlike some tools, the tip of this bit is a part of the cutting edge. These Point Cutting Roundovers give your workpiece the vee shape of a V-Groove but with a rounded top edge. Designed for decorative tri..

Product Description Roundover Router Bits(Bearing Guide), (Bearing B2 for Beading, B3 For Roundover) Whiteside 2010 3/4" radius 2" Large Diameter 1" Cutting length 1/2" shankCarbide Tipped         ..

309 EDGE BEVEL 1/2"SH, 30°, 7/8"CL Product Description                  Similar to chamfer bits, edge bevel bits provide a very small angle when used on your workpiece. This bit can also be used to make six sided boxes by using it to trim both ends of the side boards. &nb..

502 ROUNDOVER & BEADING 1/4" SHANK Product Information Easily round off all your square edges with lightweight 1/4” capacity hand routers. Keep the whole range of sizes (R1/8”, R3/16”, R1/4”, R3/8”, R1/2”) neatly organized and right at your fingertips. As with the 1/2” shank set, this kit comes fully equipped to extend its usage b..

Providing state-of-the-art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.Materials: Natural woods, composites, hard plastics, thin aluminumSIMILAR SIZESPart #Shank Dia.Cutting Dia.Cutting LengthF..