Loading... Please wait...

Call Today 410-465-6209, We are happy to help


Our Newsletter

Byrd Rail Shaper Cutter loaded with #5R Shaker Pattern Inserts Bore (choice)

  • Image 1
  • byrd 5R rail cutter
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
Your Price:
$299.00 (You save $10.00)
6.00 LBS
Typically in stock
Calculated at checkout
Bookmark and Share

Product Description

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head.

  • Major Diameter 4" for 3/4" bore bodies, 4-1/2" for 1-1/4" bodies
  • Please specify bore when ordering
  • Cutting Edge Length 30mm for stock 3/4” to 7/8”
  • Comes loaded with 5 R inserts can also run 5 LR, 5 RR, 5RE (eased edge (allows you to paint and stain under the stile on an assembled door so when panels move which they will you do not see the unsighty lines where finish or paint was not applied.05" r) Carbide inserts**
  •  5r-5lr.png5-re-rr-eased-edge.png
  • Wrench included
  • Bore 3/4 "
  • Balanced & Verified
  • Made in USA
  • Black Oxide Finish
  • Useful in other woodworking applications. 

**One pattern of the Shaker cutters has a symmetrical pattern, while in the other we have both right hand and left hand rotation patterns in stock. The tips we make are identical for the two bore sizes. The typical groove dimension is ½” long by 1/4” wide. We designate the left hand tools CCW rotation, material face down. The right hand tools would be CCW rotation, material face up. The tip dimension itself is 30mm wide which will easily accommodate a 3/4” to 7/8” stock width. Any of the same hand stile or rail tips will fit in any of the corresponding heads. The exceptions would be the glass door patterns with non-glass door and the Shaker patterns. The 3/4” bore tools all have a 4” large OD and a 3” small OD. You can use a 3” bearing rub collar for arched doors. The collars are kept in stock with this diameters, but we can manufacture whatever diameter you need. The difference in the “stain relief” pattern heads is there is a small radius ground on the tips in the corners. They are also known as “eased edge” tips. Note that typically Shaker bodies are required for the corresponding tips, this is because backing is required for the tip to not break in operation.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Byrd Rail Shaper Cutter loaded with #5R Shaker Pattern Inserts Bore (choice) to your wish list.

You Recently Viewed...