One of our best sellers, used in many cutter heads, Perfect match H7319

14mm x 14mm x 2mm - 4 Cutting Edges : square on all 4 sides with sharp points

Grade KCr08, great all around grade of carbide, slightly better performance than Hc05, very good on HDF,MDF, Softwood, Optimal for Hardwood and Chipboard

The performance benefits reduce the frequency of tool changes and optimise the overall efficiency. Upgrading to the new KCR08 standard is simple: any existing HC05 reversible knife or profile blank can now be converted to KCR08.

Same insert as CMT 790.140.00 Carbide Knives 14x14x2

(fits many rebate spurs, certain spiral heads can use this size including Woodstock and Grizzly Spiral heads, please ask before ordering if unsure  If your Grizzly spiral has a JT, this will not fit.  We stock the JT replacement knives. )

Holes 1 : 6.5mm

Bevel: 30 degree

Sold in packs of 10 only

Plastic Case included

Made in the European Union

Grizzly Models which use this insert:

H7653 6" Spiral Cutterhead REQUIRES  34

H7654 8" Spiral Cutterhead REQUIRES   40

H7655 15" Spiral Cutterhead REQUIRES   72

H7656 20" Spiral Cutterhead REQUIRES   96

G1033ZX 20" Planer w/Spiral Cutterhead REQUIRES   96

G4815 20" Jointer w/Spiral Cutterhead REQUIRES   140

G9740Z 20" Planer w/Spiral Cutterhead REQUIRES  144

G9859Z 8" Z Series Jointer w/Spiral Cutterhead REQUIRES   60

G9860ZX 12" Z Series Jointer w/Spiral Cutterhead REQUIRES   84

G9953ZX 16" Z Series Jointer w/Spiral Cutterhead REQUIRES   120

G9953ZXF 16" Z Series Jointer w/Spiral Cutterhead REQUIRES   120

G9961 24" Planer w/Spiral Cutterhead REQUIRES   162

G9967Z 20" Planer w/Spiral Cutterhead REQUIRES   144

G1033X V1 20" Planer w/Spiral (Manuf 6/07 & before) REQUIRES   96

G0634 12" Planer/Jointer w/Spiral Cutterhead REQUIRES   56

G0526 6" Anvsy Edition Jointer w/Spiral Cutterhead REQUIRES   34

G0543 8" Jointer w/Spiral Cutterhead REQUIRES   40

G0544 20" Planer w/Spiral Cutterhead REQUIRES  96

G0480 V1 10" Jointer w/Spiral Cutterhead REQUIRES   48

Composition:

Co + Ni 4.2%, WC balance,

Other 0.35%

Co + Ni 4.2%, WC balance,Other 0.35%

Grain size:
Submicron grain 0.5 - < 0.8 μm

Transverse rupture strength:

2300 MPa

334.000 P.S.I.

Hardness:

1920 HV10

1885 HV30

93.4 HRA

Density:
15.20 g/cm³

Fracture toughness K1C:
8.7 MPa.m^1/2